How To Reconnect To My Zmodo Camera

Zmodo has a new setup method chosen 'Zink' for smart WiFi devices. If you take purchased your product recently, it may have been updated with a newer firmware that is uniform with the 'Zink' setup process. If you have i of the post-obit products, your device may be compatible with 'Zink':

1) Pin (ZM-SH86B001-WA)

ii) Greet (ZM-SHD003B)

3) Smart WiFi Doorbell (ZM-CJAED)

iv) Mini WiFi Photographic camera (ZM-SH75D001-WA)

5) PT Camera (ZH-IZV15-WAC)

6) WiFi Camera Kits (ZM-W0002, ZM-W003, ZM-W0004, etc.)

vii) NVR kits with WiFi cameras

8) Beam (ZM-SHRZ01W)

If your quick guide instructs you to use 'Zink' please follow these instructions to set up up your WiFi device. If your quick guide instructs yous to use SmartLink, delight skip to the "Using SmartLink" section to set your device using SmartLink.

You may also view our Zink video tutorial for guidance on the setup.

Note: If yous already have a Beam installed, you lot will be able to prepare your device using the "Automated Connexion" setup method. "Automatic Connectedness" uses your Beam to connect all of your 'Zink'-compatible WiFi devices in a few easy steps.

Using Zink:

i) Before yous begin:

Make sure you have read the minimum requirements for your product. If you are connecting a Greet, Torch Pro, or a Smart Doorbell, you volition need to complete the installation steps before configuring your product.

ii) Download the free app and create a free account.

Download and open the gratuitous 'Zmodo' app from Google Play or the App Store and sign up for a gratuitous Zmodo account. You can create an account using a valid electronic mail address (shown below) or a phone number.

If yous already accept a Zmodo account, please log in.

3) Open up the (+) Add together Device menu and start the 'Zink' Setup Process.

One time yous've logged into your account, you lot will be taken to your Device List home screen. Open up the Add Device "+" menu on the upper correct-hand corner and select the 'Zink' setup method. If y'all exercise not have a Beam already, select the 'Normal' setup selection.

four) Connect to your phone to your WiFi device's wireless indicate.

Your will be prompted to connect to your device's WiFi signal. Press "Tap here to select WiFi" to go to your smartphone's WiFi settings page, and select your device's WiFi bespeak. If you're connecting a Beam, connect to the SSID called "AP_ZMD". If you're connecting any other 'Zink' WiFi device, connect to the SSID called 'ZMD_SAP'.

v) Enter your WiFi information into the corresponding fields.

Enter the WiFi information (SSID and countersign) for the WiFi network that y'all want your device to connect to. Delight note that you need aii.4GHz WPA/WPA2 password-protected WiFi network, and that your network proper noun (SSID) mustNotinclude spaces, and it mustNOT be subconscious. For example, "My Router" will notwork, but "My_Router"willwork.

You can access your router's settings to change your SSID.

'Zink' will automatically detect and connect your device. The app may prompt you to connect to your WiFi network. If it does, please select "Tap here to select WiFi" and connect you smartphone to your WiFi network. One time continued, you tin can render to the Zmodo app until your device is connected.

half dozen) Proper name your device.

In one case your Zmodo device is successfully connected, you will be prompted to proper noun your device and fix the timezone. You can select a unique name, or y'all tin can name it after its location or part. It is recommended that you lot set a device password for security. It will then ask you whether you want to share your device or not. In one case these steps are completed, your Zmodo wireless device will be prepare for use!

Using SmartLink:

1) Before you begin:

Make sure you have read the minimum requirements and have successfully completed the installation portion of this support page. Connect your Android or iOS smartphone to the WiFi network that you lot want to connect to your Zmodo wireless device (must be ii.4GHz).

two) Download the gratuitous app and create a free account.

Download and open the gratuitous 'Zmodo' app from Google Play or the App Store and sign up for a free Zmodo account. You can create an account using a valid email address (shown beneath) or a phone number.

If you already have a Zmodo account, please log in.

3) Select the (+) Add Device option.

Once you've logged into your business relationship, you lot will be taken to your Device List domicile screen. Select the Add together Device "+" option on the upper right-hand corner. A few in-app instructions will assist guide you to set your Zmodo wireless device for network configuration.

four) Enter your WiFi countersign.

Power on your device(southward) and select the number of devices that you are going to configure. Y'all will be prompted to enter the countersign for the WiFi network that your phone is connected to. This will be the WiFi network that your Zmodo device will connect to. For your convenience, please brand sure that you lot enter your password carefully and correctly (case-sensitive). Delight allow a few minutes for SmartLink to automatically find and connect your device to the WiFi network.

five) Proper noun your device.

Once SmartLink has successfully connected your Zmodo device, you lot volition be prompted to name your device and set the timezone. You tin select a unique name, or you can name it subsequently its location or office. Information technology is recommended that you prepare a device password for security. It volition then ask you whether y'all desire to share your device or not. Once these steps are completed, your Zmodo wireless device will be set up for utilize!

Mutual Troubleshooting Tips

If your device isn't connecting to the wireless network, you may be encountering some mutual and resolvable issues. Delight try one of the following if yous are having problem connecting your device:

1) You may have entered your WiFi countersign incorrectly. Please reset your device. Look for it to ability back on, and retry the setup process once the LED is blinking dark-green.

2) Your wireless signal may be besides weak. In guild to better your wireless signal, please refer to the FAQ on improving wireless signal strength.

3) Still having trouble? Contact our friendly support squad at support@zmodo.com.

Source: https://support.zmodo.com/index.php?action=artikel&cat=27&id=101&artlang=en

Posted by: silvasessood.blogspot.com

Share this post